This work is for the design study of natural gas reformer (40 m3/hr over). We used experimental kinetic data from literature. After that, we set up theoretical model based on experimental reaction kinetic data. The shape of reactor is 1.7 m long and 200 mm dia. with cylinder geometry. Volume of reactor is 53.4 liter. Average flow velocity of gases in the reactor has been determined 0.272 m/sec and residence time is 9.26 sec. Reaction temperature is 850℃, with pressure 9.3 Bar. Used natural gas volume is about 9.21 m3/hr. Produced hydrogen is 43.7 m3/hr with no change of pressure. Unreacted natural gas is 0.09 m3/hr and the amount of steam is 26.9 m3/hr. Steam to CH4 (s/c ratio) is 2.91. Reforming reaction take place from the reactor entrance to 120 cm region of cylinder type reactor. After the entrance of reacting gases to 120 cm region, the reaction reaches equilibrium which is close to products. This study can be applicable to design various reactors. Output data is in good agreements with the data in literatures1).