[재료분석실험] Studying of IMC morphology, interfacial reaction and joint reliability of Pb-free Sn-Ag-Cu solder on electrolytic Ni BGA substrate(영문)

 1  [재료분석실험] Studying of IMC morphology, interfacial reaction and joint reliability of Pb-free Sn-Ag-Cu solder on electrolytic Ni BGA substrate(영문)-1
 2  [재료분석실험] Studying of IMC morphology, interfacial reaction and joint reliability of Pb-free Sn-Ag-Cu solder on electrolytic Ni BGA substrate(영문)-2
 3  [재료분석실험] Studying of IMC morphology, interfacial reaction and joint reliability of Pb-free Sn-Ag-Cu solder on electrolytic Ni BGA substrate(영문)-3
 4  [재료분석실험] Studying of IMC morphology, interfacial reaction and joint reliability of Pb-free Sn-Ag-Cu solder on electrolytic Ni BGA substrate(영문)-4
 5  [재료분석실험] Studying of IMC morphology, interfacial reaction and joint reliability of Pb-free Sn-Ag-Cu solder on electrolytic Ni BGA substrate(영문)-5
 6  [재료분석실험] Studying of IMC morphology, interfacial reaction and joint reliability of Pb-free Sn-Ag-Cu solder on electrolytic Ni BGA substrate(영문)-6
 7  [재료분석실험] Studying of IMC morphology, interfacial reaction and joint reliability of Pb-free Sn-Ag-Cu solder on electrolytic Ni BGA substrate(영문)-7
 8  [재료분석실험] Studying of IMC morphology, interfacial reaction and joint reliability of Pb-free Sn-Ag-Cu solder on electrolytic Ni BGA substrate(영문)-8
※ 미리보기 이미지는 최대 20페이지까지만 지원합니다.
  • 분야
  • 등록일
  • 페이지/형식
  • 구매가격
  • 적립금
자료 다운로드  네이버 로그인
소개글
[재료분석실험] Studying of IMC morphology, interfacial reaction and joint reliability of Pb-free Sn-Ag-Cu solder on electrolytic Ni BGA substrate(영문)에 대한 자료입니다.
목차
1.Subject

2. Backgrond

3. Component

4. Condition

5. Analysis

6. Result and Discusstion

7. Reference


본문내용
4. Condition

If reflow, IMC layer occurs between the solder ball and substrate. IMC layer's composition changes depending on reflow time.

Temperatuer
255℃
Reflow time
1s, 1min, 5min, 10min, 20min
Experimental conditions



5. Analysis

IMC layer change was observed according to the reflow time.(Reflow time : 1s, 1min, 5min, 10min, 20min). Do refer to .

Reflow time
IMC layer
SEM micrographs
1s
(Ni,Cu)3Sn4

The SEM micrographs of the Sn–3.5Ag–0.7Cu/Ni interface reflowed at 255℃

참고문헌
7. Reference

IMC morphology, interfacial reaction and joint reliability of Pb-free Sn–Ag–Cu solder on electrolytic Ni BGA substrate. / Jeong-Won Yoon, Sang-Won Kim, Seung-Boo Jung.