1. Pump에서의 Cavitation (공동현상) 에 대하여 기술하고 이로 생길 수 있는 문제점과 그 방지책에 대해 논하시오
- Cavitation이란
유체가 넓은 유로에서 좁을 곳으로 고속 유입하거나 벽면의 요철, 만곡부 등으로 흐름이 직선적이지 못할 때 유체는 저압이 되고 포화증기압보다 낮아지면 기화되어 기포가
2003 to 2010
Fiscal year Net CF provided by operating activities Net CF used in investing activities Net CF provided by financing activities Net change
in cash Cash and equivalents at the beginning of the year Cash and equivalents at the end of the year
10 4,730 (12,230) 7,807 307 66 373
09 2,806 (4,259) 1,472 19 46 66
08 (486) (3,543) 4,045 15 30 46
07 604 (3,990) 3,236 (149) 179 30
06 24
mass if m = 0.5 kg at a distance of e = 0.15m from the axis of rotation, as shown in Fig.3.55.
The tail section has a length of 4 m, a mass of 240 kg, a flexural stiffness (EI) of 2.5 MN-m2, and a damping ratio of 0.15. The mass of the tail rotor blade, including their drive system, is 20 kg.
Determine the forced response of the tail section then the blades rotate at 1500 rpm.
force) 등이 있다. 저항을 나타내는 척도로서는 응력(stress)을 사용하고, 변형에 대한 척도로서는 변형률(strain)을 사용하고 있다.
기계장치를 구성하고 있는 각종 요소가 적절한 구속운동을 하여 외부적으로 일을 하기 위해서는 각 요소가 충분한 강도(strength)와 강성도(stiffness)를 가져야 하는데, 이러한