Design Summary
Bandpassfilter using coupled lineMicrostripline
Implementation of L, C with Width & Length
Bandpass Fillter
IMT-2000 frequency bandwidth between 2.25 GHz and 2.75 GHz
Chebychev Filter
Sharp skirt characteristic
Design Procedures
Using two different equal-ripple
0.5 dB : High insertion loss
0.2 dB : More improved Insertion loss
A filter is widely used in overall RF system. There are many species and structures in filter. A filter seems to be simple, but there are many considerations to designfilter. In this paper, we designmicrostripbandpassfilter which has bandwidth of 500 MHz and center frequency of 2.5 GHz. Alumina is used as substrate, and chromium is used as conductor. Final results are achieved as follows. Ins
hairpin resonator and applies it to the design of an X-band
oscillator. The measurement of the resonator itself shows that the
suggested resonator provides a higher loaded quality factor with
reduced circuit area compared to the conventional hairpin
resonator. The oscillators are designed to operate at 9.2 GHz
using the conventional and novel hairpin resonators, to compare
the phase noise p
흐르는 현상. 이러한 현상으로 인하여 많은 전류의 손실이 생기게 된다.
라는 현상 때문에 일반 도체 Wire를 쓸 수 없게 됩니다. 따라서 마이크로파 영역의 주파수를 다루는 회로에는 일반 Transmission Line이 아닌 특수한 Transmission Line이 쓰이게 되는데, 이러한 Transmission Line을 “MicrostripLine”이라고 한다.
, 신호를 증폭시킨다면 신호뿐만 아니라 noise도 증폭될 것이다. 그래서 우리는 noise를 필터링해야 하며, 이 역할을 해주는 것이 Low Noise Amplifier 이다. LNA를 사용함으로서 bad channel상태에서의 수신된 신호를 검출할 수 있게 된다. 따라서 우리는 이 보고서를 통해 LNA를 설계하는 방법을 설명할 것이다.