Photoluminescence의 장점
형광이 중요한 이유는 sensitivity가 좋기 때문이다. 10ppm~1ppb의 측정
범위로 여러 분광법 중 가장 감도가 좋고 분자 1개의 검출도 가능하다.
본질적으로 좋은 감도 → 검출한계는 흡수법보다 101∼103정도 더 작다
→ 전형적인 검출한계: 수 ppb 정도
선형 농도범위가 크다
3.1.3 분석방법
➀ 측정된 XRD 데이터를 가지고 X축(2θ), Y축(강도)으로 그래프를 도식화 한다.
➁ 그래프 상의 peak의 위치(2θ)로 Bragg 각(θ)을 찾는다.
➂ 가장 강한 intensity를 가지는 3개의 peak의 Bragg각을 사용하여 면간거리(d)를 계 산한다. (2d sinθ = nλ)
➃ 3개의 면간거리를 JCPDS 데이터와
Introduction
Problems of YAG
Difficult to control CRI
Wavelength between blue light and yellow light
The samples were ground with an agate mortar, then fired at 1550 ℃ for 10hours.
Result Analysis
Intensity according to fraction of Ce3+ ion : 0.15 > 0.21 > 0.09 > 0.03
Intensity is largest at 0.15. Why?
* Concentration Quenching :
Too much activator concentration
->Reab
실험결과 분석
: 실험결과로 uv-vis spectrophotometer를 통해 Absorbance를 측정했고, Fluorescence Spectrophotometer를 통해 Photoluminescence를 측정했다. uv-vis 관찰 결과 약 505nm 부근에서 그래프의 변곡점 모양을 확인할 수 있었다. 또한 Photoluminescence 그래프의 최대 peak는 그보다 약간 더 장파장인 523.5nm 부근에서 peak가 나
Photoluminescence)
②전계발광(electroluminescence)
③음극선발광(Cathodoluminescence)
[그림1.형광체의 정의]
(2)형광체의 구성과 요건
형광체의 구성물질로는 Host, Activator, Sensitizer가 있다.
Activator는 가시광선에 해당하는 에너지 준위를 가지고 있어야 하며 적당한 모체에 첨가되었을 때, activator의 기저준위