In describing the answer to the question below, try to share your opinions on the basis of evidences such as articles and books. Also provide information of the evidence (author, title, journal name, etc.).
1. Explain what happens in terms of mechanical/chemical properties when making products using metal-based 3D additive manufacturing technology. (10 points)mechanical properties
전통적
Fracture criteria for brittle material)
ⅰ. 최대수직응력기준 (Maximum normal stress criterion)
취성재료는 사전의 항복현상이 나타나지 않고 파단으로 갑자기 파괴되는 특성을 갖는다. 가량 단축 인장응력을 받는 경우, 그 부재가 파손되는 수직응력의 값은 인장시험 시 얻어지는 그 재료의 극한강도 와 같다. 따라
Ⅰ. INTRODUCTION
In fourth semester most of our department students attend the subject of mechanical manufacturing practice and we have made a bolt by ourselves. But the process was not a soft job. A bolt and nut is used diversely but it seemed that we don't know much about a importance and manufacture of bolts.
A bolt is a threaded fastener used in industry to make two or more mechanical
Bonding Test를 실시하여 Sn-Pb Solder와 Pb-Free Solder 간의 차이를 확인하고 Pb-Free Solder중에서도 각 재료마다의 Mechanical Bonding Test를 실시하여 Bonding Force를 체크한다. 보통 Soldering 된 제품이 받는 Stress 는 Tensile Stress 보다는 Shear Stress 가 주요하기 때문에 Solder 선택 시에는 Solder의 Tensile Property 보다는 Shear Pr
Tensile properties
인장 강도의 측정은 재료에 인장응력을 가해 견디는 강도를 측정한 것이다. 인장응력은 온도의 영향을 많이 받기 때문에 실험은 모든 재료가 같은 온도 하에서 실시되어야 한다. 또한 극한 UTS 측정시에는 온도와 Strain rate를 함께 고려하여야 한다.
3. Shear properties
Shear Property인 Shear M