design microstrip bandpass filter which has bandwidth of 500 MHz and center frequency of 2.5 GHz. Alumina is used as substrate, and chromium is used as conductor. Final results are achieved as follows. Insertion loss at 2.25 GHz is 2.28 dB. Insertion loss at 2.75 GHz is 2.33 dB. Attenuation at 2 GHz is 32.75 dB. Attenuation at 2.5 GHz is 44.35 dB. Attenuation at 4 GHJz is 50.74 dB. And the number
Design Summary
Bandpass filter using coupled line
Microstrip line
Implementation of L, C with Width & Length
Bandpass Fillter
IMT-2000 frequency bandwidth between 2.25 GHz and 2.75 GHz
Chebychev Filter
Sharp skirt characteristic
Design Procedures
Using two different equal-ripple
0.5 dB : High insertion loss
0.2 dB : More improved Insertion loss
designed to operate at 9.2 GHz
using the conventional and novel hairpin resonators, to compare
the phase noise performance. The measurement shows an output
power of 9.78 dBm and 10.87 dBm, respectively. The phase noise
of the oscillator using the novel resonator shows −101.49 dBc/Hz
at 100 kHz offset, which is better than that of the conventional
resonator by 6.17 dB.
Keywords-hair
제품이 쉽게 고장 나면 안되기 때문에, 제품의 견고성이 중요하다. 그리고 시험을 보며, 제품에 의해 부상자가 나오면 상당히 문제되기 때문에 안전성도 중요하다. 그리고 사용이 편리해야 하기 때문에 사용 편의성이 중요하고, 마지막으로 비용이 중요하다고 볼 수 있다.
5. 개념설계(Conceptual Design)
Ⅱ. 수강신청 프로그램 소개
이번 데이터베이스 프로젝트는 아주대 수강신청 프로그램을 구현하였다.
기존 수강신청 시스템을 구현해보고 추가적인 편의 기능을 제공하는 데이터베이스를 구현 하였다.
기존 수강신청 프로그램은 과목ID, 학부 전공, 교양, 기초과목에 따른 과목을 검색하여 강의신청