◎ 능동 진동 제어 실험
1 압전재료 (Piezoelectric material)
- 압전재료란 Piezo전기소자라고도 하는데 기계적 응력에 따라 분극을 일으켜 외부에 전
하를 발생시키는 재료를 말한다. 쉽게 말해서 인장, 압축 또는 뒤틀림의 응력을 받아서
변위가 발생하면 결정에 유전분극이 발생하던가 또는 반
그래프를 보면 알 수 있듯이 damping ratio의 값이 커짐에 따라 TR의 값은 1로 수렴해 가는 것을 볼 수 있다. 여기서 damping ratio의 값이 작을 때는, TR의 값이 매우 크게 나타나는 것을 볼 수 있는데, 이는 값이 1에 가까워서, 즉 이 시스템의 고유진동수와 입력 진동수가 거의 일치하여 공진현상이 발생했기 때
damped frequency
fn = undamped frequency
mliquid = added mass of liquid
M = damping coefficient
C = mcantilever + mliquid
ζ = damping ratio
Caffeine↑⇒ Mass on the surface↑⇒ Oscillation frequency↓
⇒ frequency shift↑
MIP Coated crystal is very sensitive to the concentration of caffeine and
shows Very good linearity relationship
Effect of pH on the sensor res
약 - RLC직렬 회로에서 저항값변화에 따른 커패시터전압의 변화를 예상하고 실험으로 확인한다. 또한 damping ratio에 따른 다양한 출력파형에 대해 실험으로 분석해본다. 또한 주파수에 따른 출력변화를 예상하고 실험으로 확인한다.
Ⅰ. 실험의 필요성 및 배경
RLC 직렬회로에서 각각소자의 임피던스에
mass if m = 0.5 kg at a distance of e = 0.15m from the axis of rotation, as shown in Fig.3.55.
The tail section has a length of 4 m, a mass of 240 kg, a flexural stiffness (EI) of 2.5 MN-m2, and a damping ratio of 0.15. The mass of the tail rotor blade, including their drive system, is 20 kg.
Determine the forced response of the tail section then the blades rotate at 1500 rpm.