완전 소성 재료의 구성방정식으로써 널리 사용되는 것은 대체적으로 최대 비틀림에너지기준(von Mises yield criterion)이다. 또한 최대 전단응력기준과 최대 비틀림에너지기준 모두 응력결합 하에서의 점탄성(viscoelastic) 현상의 해석에도 사용된다. 이러한 생각을 확장하면 변형률-경화 재료(strain-hardening mater
In describing the answer to the question below, try to share your opinions on the basis of evidences such as articles and books. Also provide information of the evidence (author, title, journal name, etc.).
1. Explain what happens in terms of mechanical/chemical properties when making products using metal-based 3D additive manufacturing technology. (10 points)mechanical properties
전통적
Fracture
Static Loading
Brittle, Ductile, Creep Rupture
Fatigue(Dynamic Loading)
A degradation of mechanical properties leading to failure
of a material or a component under cyclic loading
High/Low cycle, Fatigue crack growth
Classification of failures according to cause
77% of failures are
generally caused
directly or indirectly
by fatigue
Process of fatigue fracture
The
1)실험목적
인장시험은 재료강도에 관한 기초적인 자료를 얻을 목적으로 수행되는 공업시험 중에서 가장 기본적인 시험으로, 보통 환봉이나 판 등의 평행부를 갖는 시험편을 축방향으로 인장하중을 가해 하중과 변형을 측정한다.
보통 이로부터 측정할 수 있는 값은 연성재료와 취성재료가 다르며,
Background of Experiment
□ Al-Si Alloy
AI + Si = Al-Si Alloy
1. Low melting point
2. light
3. Large heat capacity
4. Insoluble to each other
.
.
.
Result and Analysis - EDS
□ Composition Analysis
Al, Si is almost insoluble to each other at rsoom temperature.
All solid phase will have either 100% Al phase or 100% Si phase.