Fracture
Static Loading
Brittle, Ductile, Creep Rupture
Fatigue(Dynamic Loading)
A degradation of mechanical properties leading to failure
of a material or a component under cyclic loading
High/Low cycle, Fatigue crack growth
Classification of failures according to cause
77% of failures are
generally caused
directly or indirectly
by fatigue
Process of fatigue fracture
The
Fatigue
○ Fatigue
재료 및 구조물에 Cycle에 의한 응력의 반복현상으로 발생하는 것이다.
○ Process of Fatiue fracture
초기 균열인 The initiation으로 균열이 진전 되면서 소성변형인 Catastrophic
rupture 가 발생하게 된다.
∙ The initiation
∙ The propagation of fatigue crack
∙ Cat
Fatigue Failure Process
균열발생 단계(Crack-Initiation Stage)
공업재료는 연성이며 제조한 상태대로는 균열이 존재하지 않지만, 일반적으로는 입자, 함유물 등을 포함하고 있다고 가정한다. 미시적 크기에서 금속은 균질하지도 않고 등방성도 아니다. 또한 기하학적으로 응력집중(노치)이 되는 부분이 있다
.
(3) 본질적으로 경도가 탄성계수가 높은 재료가 좋다. 열처리에 의한 경도상승도 효과가
있다. 그리고 경도와 탄성계수의 조합인 H/E 또는 H/E가 큰 재료를 선정한다.
6. 피로마모(Fatigue Wear)
일반저긍로 구름접촉을 반복하면 표면피로로써 pittin를 발생하나 이 경우는 소위 구름
접촉피로
Ⅰ. INTRODUCTION
In fourth semester most of our department students attend the subject of mechanical manufacturing practice and we have made a bolt by ourselves. But the process was not a soft job. A bolt and nut is used diversely but it seemed that we don't know much about a importance and manufacture of bolts.
A bolt is a threaded fastener used in industry to make two or more mechanical