Variables
설정
global edge length
5 mm
maximum aspect ration
24.265
input parameter minimum
5
remesh area-gate
10mm(?)
no.of channels
8
distance bet.channel centers
30mm
distance to extend beyond part
150mm
channel diameter
10mm
far above and below the circuit
20mm
filling control
-injection time
1s
velocity/pressure switch over
-By % volume filled
99%
시간으로 Y축을 신호의 크기로 하며 chromatogram을 그려낸다. X축의 시간(retention time)은 기존에 알고 있는 표준 시료와 비교하여 정성분석에 사용될 수 있으며 Y축을 높이로 피크의 축을 밑변으로 한 피크의 면적은 정량 분석에 이용된다. Recorder는 단순히 피크를 그려내며 integrator등 data module은 피크에서 판
제품 선정
메쉬(Mesh)의 정의 및 수정 작업
분석 순서 설정 (Set Analysis Sequence)
고분자 재료 선정
삽입(Injection) 설정
냉각수 유입 설정(Creat Cooling Circuits)
공정 설정(Process settings)
Filltime
Pressure at injection : XY plot
Temperature at flow front
Volume shrinkage
Weld Line 생성 위치와 정도