3D printing
3D printing or additive manufacturing (AM) refers to any of the various processes for printing a three-dimensional object. Primarily additive processes are used, in which successive layers of material are laid down under computer control. These objects can be of almost any shape or geometry, and are produced from a 3D model or other electronic data source.
Basic principles
If the
- IF Filter 사전 실험
• 설계했던 455kHz가 아니라 475kHz에서 공진주파수가 나타나는 것을 확인할 수 있었다.
• 하지만 실제 구현하는 AM receiver에서 공진주파수와 Bandwidth가 크게 중요하지 않기 때문에
Filter의 설계를 수정하기보다 Amplifier와 Envelope Detector의 설계에 집중하였다.
2.2.2 IF
filter and separation occurs by a sieving
action based on the pore diameter and particle size
(i.e. smaller molecules will diffuse faster than larger molecules).
Transport proceedes via diffusion through a nonporous membranes.
Membranes are highly swollen to reduce diffusive resistence.
Applications
Dialysis is used in varying circumstances such as: when a large pressure difference
Filtering을 해주었다. 첫 번째는 Greater와 Less를 이용해서 Raw Data에서 x℃ 이상, y℃ 이하의 하한, 상한 값을 주어 너무 크거나 작은 온도에 해당하는 값들을 걸러 내었다. 단, 이때 나오는 Greater와 Less의 값들은 True일 때 1, False일 때 0이므로, 다시 원래 Data를 곱해주고, True값만 Count해서 나누어줌으로써 1차