tensile test)
인장실험은 시편 양끝에 인장 실험용 jig를 설치한 측정한다.
각 시편의 특성에 따라 가해지는 힘에 따라 변형 또는 파단이 일어나게 되는데 이를 각각 인장 변형률 (tensile strain)과 인장강도(tensile stress)라 한다.
인장변형률(ε) : ε =∆L/L0
인장강도(σ) : 변형(또는 파단)이 일어날 때
tensile strength 혹은 ultimate strength)
항복이 일어난 후, 변형이 계속적으로 증가하면 이에 따라 비선형적으로 응력도 증가하게 된다. 이 응력은 최대응력까지 증가한 후 다시 감소하다가 재료는 파괴하게 된다. 이 때, 최대 응력을 인장강도라 한다.
3. 실험 장치
4. 인장 시험편
공
Tensile Strength
Indicated by the maxima of a stress-strain curve and,
in general, indicates when necking will occur.
Tensile strength obtained from tests of the double
axial loads P notation refers to the value
calculated by dividing .
Shear Strength
-An intersecting point of th
in the range of theory, and the value from the second experiment is 0.16 which also comes under the range of theory. In case of specimen no.1, there was an error of 12.6% but the Poisson's ratio is highly appropriate. From this, we can analogize the Poisson's ratio has nothing to do with strength, but is related to the materials.
4. Shear Modulus of Elasticity
‣ Theoretical Value
tensile strength, UTS)까지 힘을 받지 않아도 파괴되어 버리는 Fatigue 현상이 있다.
<그림 1> Mechanical Bonding Test1. Mechanical Bonding Test
기계적 강도 측정법(Mechanical Bonding Test)에는 크게 두 가지가 있는데 <그림 2>와 같이 Shear Test와 Pull Test가 있다. 현재 가장 흔히 쓰이는 방법은 Shear Test로 Solder를 PCB 기판에 접