이다.
미생물이 폐수내의 유기물질을 분해할 수 있도록 충분한 시간이 제공되어야 한다. 만약 폭기조에서의 체류시간이 너무 짧다면, 유기물질의 제거가 만족스럽지 못해 유출수의 BOD가 높을 것이다. 침전지에서의 체류시간 또한 생물학적 floc의 침전시간을 허용한다는 점에서 중요하다.
6. pH
1. Justifications of the proposed schemes -the structural problem& the chemical injection locations
2. Design impeller and tank type affecting energy efficiency, cost, flocculation size. Design Diffuser Walls and Baffles used for Minimizing Short Circuiting
3. Design launder type, structure, sludge and scum model
Filtration의 세번째 key concept 이유: (to promote readily biodegradabl
Flocculation Basins)
플록형성지의 설계착수에서 가장 먼저 플록형성지의 형태를 결정해야 한다. 이를 위해 가장 중요한 인자는 원수의 탁도와 처리수량의 변화이다. 원수의 탁도가 높고 처리수량 변화가 큰 경우 기계적 플록형성방법을 채택하는 것이 좋고, 비교적 수질과 수량이 일정한 경우 수리학적
용수 처리에서는 원수(原水)속에 존재하는 미립자를 응집시켜 으로 만들고, 만들어진 을 침전시켜 물속의 여러 이물질을 제거하는 주된 공정이다. 폐수 처리 공정 중 가장 많이 사용되는 활성 슬러지법은 활성 슬러지에 의하여 폐수 중의 유기물질을 처리하는 방법이다. 활성 슬러지는 주로 박테리아가
Ⅲ Flocculation
The purpose of flocculation is to uniformly mix coagulated water to produce either settleable or filterable floc and accelerate the rate of particle collisions, causing the agglomeration of electrolytically destabilized colloidal particles into settleable and filterable sizes.
Considerations of flocculation are:
1. Baffling to prevent of flow short-circuiting
2. Tapered