- Thermal conductivity: 397 W/Mk
Caution
- Be careful of explosion
- Be careful of physical contact.
1. Put the test piece between
standard cylinders and check
the connection of thermocouple
2. Open the valve #1 to supply the
water to the head tank and the
keep others closed.
3. Open the valve #3 when the
head tank overflows and confirm
the flow of cooling water
tanks
to remove large debris such as sticks, leaves, trash and other large particles
water stored in reservoirs for periods between a few days and many months to allow natural biological purification to take place
salts are treated with soda-ash (Na2CO3) to precipitate CaCO3 out utilizing the common-ion effect
chlorinated to minimize the growth of fouling organisms on the pipe-work and tanks
Tank, Nozzle, Plug&Cable, Pipe, Sensor, Switch로 나누어진다. 이름만 들으면 바로 알아챌 수 있는 부품들이다. 상당히 간단한 구조로 되어 있다는 것을 알 수 있다. 그러나 심플한 구조로 이루어져 있음에도 불구하고 상당히 많은 물리적 원리가 적용되어 있다. 열역학적 원리와 중력을 이용해서 물을 이동시키고,
Additional solution
Install more heat exchanger
Establish PB/A-2 polymerization pure supply line
Replacement of tank
Change of Prethickner, Recovery Filter supply line
Establish hot water line and EPS
1. Suggesting the plan that can solve a cleaning problem of a heat exchanger
2. Suggesting the plan of exchanging pipe that can increase the efficiency by increasing the pressure