temperature transformation diagram): 온도, 시간, 변태곡선
3) 표면 경화법
① 화학적 표면 경화법
ⅰ) 침탄법: 고체(목탄, 코우크스), 가스(CO,CO2,메탄,에탄,프로판), 침탄깊이 0.5~2mm
ⅱ) 시안화법: KCN, NaCN (청화법)
ⅲ) 질화법: NH3, 50~100 Hr, 자동차의 크랭크축, 캠, 펌프축 등에 사용. 질화층 0.4~0.8mm
* 특징
Test를 위해 Mechanical Bonding Test를 실시하여 Sn-Pb Solder와 Pb-Free Solder 간의 차이를 확인하고 Pb-Free Solder중에서도 각 재료마다의 Mechanical Bonding Test를 실시하여 Bonding Force를 체크한다. 보통 Soldering 된 제품이 받는 Stress 는 Tensile Stress 보다는 Shear Stress 가 주요하기 때문에 Solder 선택 시에는 Solder의 Tensile Property
Fatigue Failure Process
균열발생 단계(Crack-Initiation Stage)
공업재료는 연성이며 제조한 상태대로는 균열이 존재하지 않지만, 일반적으로는 입자, 함유물 등을 포함하고 있다고 가정한다. 미시적 크기에서 금속은 균질하지도 않고 등방성도 아니다. 또한 기하학적으로 응력집중(노치)이 되는 부분이 있다
high hardness and stand in shock of pedestrian or machine operation etc. is big.
On the other hand, shortcoming is
1) withstand to Apchukryeok, force that press, but is weak in tensility, force that pull.
2) because weight is high than strength, weight of building is heavy.
This is repletion fairly by high-strength concrete and light weight concrete development, use.
3) expense that const
Tensile Strength
Indicated by the maxima of a stress-strain curve and,
in general, indicates when necking will occur.
Tensile strength obtained from tests of the double
axial loads P notation refers to the value
calculated by dividing .
Shear Strength
-An intersecting point of th