Background of Experiment
□ Al-Si Alloy
AI + Si = Al-Si Alloy
1. Low melting point
2. light
3. Large heat capacity
4. Insoluble to each other
.
.
.
Result and Analysis - EDS
□ Composition Analysis
Al, Si is almost insoluble to each other at rsoom temperature.
All solid phase will have either 100% Al phase or 100% Si phase.
Aim
Reducing weights
High fuel efficiency
Low fuel consumption
Reduction total amount of CO2 gas
Structure of an automobile
Chassis
Mg-Zn-Zr alloy
Magnesium alloy + Zr
Grain refinement
Mg-Ce alloy
Precipitation Ce on GB at high temp.
High creep strength
Engine parts(Introduction)
Basic engine part
High engine weight ratio
Requir
Al-Si합금
공정조성(12.6wt%)이상 첨가시 높은 경도의 초정 Si결정이 석출되도록 설계한 합금
초정 Si결정이 수십μm 이상으로 성장시 → 경도↑, Si 결정 ↓
치밀화 해결방안 (1)
수소 플라즈마를 이용한 산화막 제거
Al-Si 표면에 생긴 산화막을 산소 플라즈마 처리 이후 수소 플라즈마를 처리한
Al-Si 합금)의 미세조직과 기계적 특성의 분석을 통하여 합금의 경량화의 최적 조건을 찾아보았다.
II. 설계 배경
생활에서 사용되는 모든 종류의 사물에는 응력이 존재하며 이 응력에 의하여 변형 또는 파괴가 일어난다. 이런 사물의 변형 파괴에 가장 큰 영향을 주는 중요한 요인인 응력 집중효과
단결정 제조 조건
고액계면 및 그 전방에서 새로운 핵생성이 일어나지 않을것
→결정의 성장속도(R) 느리게 유지
온도구배 항상 Positive
온도구배를 가능한 크게 유지하여
Planar interface 유도
.
.
.
1.Czochralski
석영이나 흑연 도가니 사용
고주파나 저항 가열체로부터 가열
Seed Crystal을 용액 표면과