1. Justifications of the proposed schemes -the structural problem& the chemical injection locations
2. Design impeller and tank type affecting energy efficiency, cost, flocculation size. Design Diffuser Walls and Baffles used for Minimizing Short Circuiting
3. Design launder type, structure, sludge and scum model
Filtration의 세번째 key concept 이유: (to promote readily biodegradabl
교반기란
액체와 액체, 액체와 고체, 또는 분체(粉體) 등을 휘저어 섞기 위한 기구
주로 화학공업에서 사용됨
교반의 형식에 따라 탱크 교반기와 유동식 교반기로 크게 나누어 짐
교반기 선정 단계
1. 필요로 하는 교반조건의 선정
2. 최적의 교반 날개의 선정
3. 교반날개의 외경 및 회전수 결정
1. Pump에서의 Cavitation (공동현상) 에 대하여 기술하고 이로 생길 수 있는 문제점과 그 방지책에 대해 논하시오
- Cavitation이란
유체가 넓은 유로에서 좁을 곳으로 고속 유입하거나 벽면의 요철, 만곡부 등으로 흐름이 직선적이지 못할 때 유체는 저압이 되고 포화증기압보다 낮아지면 기화되어 기포가
impellers. Hydrofoil impeller is a low cost alternative to propellers. Vertical impeller flocculator has high energy efficiency (it means less power is required) and has low shear stress (lower variation in G). Also it can compact flocs well and has less settling problem at the bottom. Direction of water flow by impeller rotation must be down to prevent settling, and motor is on the top of the ta
VI. 실험방법
i. 비커에 100mL 물을 넣고 조금씩 NaCl을 넣어가면서 교반시켜 더 이상 NaCl이 녹지 않을 때 그 NaCl의 양이 NaCl의 용해도가 된다. (NaCl의 용해도결정).
ii. 교반 날개를 원하는 Impeller로 바꾼다
iii. 바닥에서 6cm의 높이에 Impeller를 고정시키고 모터와 연결시킨다.
iv. 10L의 물에 10% 과포화 되는 양