Keff, Km, Kp : the effective thermal conductivities of the composite,
Metal matrix, Particles
φp : the volume fraction of reinforcements
a : the diameter of the reinforcement
- hc : the boundary conductivity.
Advantage
The air travels across the short
length of the fins laterally, rather than longitudinally down
the long length.
Focused on placing
4. Condition
If reflow, IMC layer occurs between the solder ball and substrate. IMC layer's composition changes depending on reflow time.
Temperatuer
255℃
Reflow time
1s, 1min, 5min, 10min, 20min
Experimental conditions
5. Analysis
IMC layer change was observed according to the reflow time.(Reflow time : 1s, 1min, 5min, 10min, 20min). Do refer to
Synthesis
Grafting onto
“Grafting-onto” involves the chemical reaction preformed, functionalized polymers with surfaces containing complementary functional groups
Grafting from
‘‘Grafting-from’’ involves an in situ polymerization of an initiator functionalized surface with monomer.
Grafting onto
“Grafting-onto” involves the chemical reaction preformed, functionalized p
introduction
Detergent of laundry is closely related with our life and has been examined many times.
Currently using detergents
In enzyme detergent, most of enzyme is protease.
On the other hand, lipase is not commonly used.
Problem definition
Then, how about oily laundry?
laundry should be separated
laundry should be washed several
times.
Lipolase enzyme is reported
1. Objective 1)
PVA(poly(vinyl alcohol)) is prepared by hydrolysis of PVAc(poly(vinyl acetate)), which is synthesized by emulsion polymerization of vinyl acetate.
2. Theory
1) Monomer 7)
A monomer is an atom or a small molecule that may bind chemically to other monomers to form a polymer. The term "monomeric protein" may also be used to describe one of the proteins making up a multiprote