welding with added materials
만약 용접의 길이의 5%이상의 폭이라면 재료사이의 공간을 연결할 수 없다. 슬릿(slit)의 폭에 따라서 결합되거나, 용접 선을 형성 할 수 없다. 따라서 용접과정에 따라서 wire가 공급되는 공정이 필요하다. Wire의 양은 용접속도, 용접길이, 폭에 따라 결정된다.
실제의 양을 제외하고
laser)란 "light amplification by stimulated emission of radiation"이란 영어의 각 단어 머리 자를 따서 조합한 합성어로서 우리말로 하면 "유도 방출 과정에 의한 빛의 증폭"이란 뜻이 된다. 일반적으로 레이저란 말은 레이저 빛을 발생하는 장치를 지칭하기도 한다, 레이저 빛(또는 레이저 광)은 유도 방출로 증폭된 빛
laser to build layers
The laserbeam traces a cross-section of the part pattern on the surface.
Exposure to the ultraviolet laser light cures and solidifies the pattern.
After the pattern has been traced, the platform descends by a distance equal to the thickness of a single layer.
SLS - Selective Laser Sintering
An additive manufacturing technique that uses a laser as the power source t
Laser Molecular Beam Epitaxy), 펄스 레이저 증착법(PLD, Pulsed Laser Deposition) 등이 그것인데, 이번 실험에서 사용한 증착법은 전자빔 증착법이다.
전자빔 증착법은 박막을 증착시킬 때, 증착시키고자 하는 물질을 소결하거나 녹여 고체 상태로 제조하고 전자빔을 쏘아 휘발시켜 기판에 증착시키는 방법이다. 이
하나로써 신비롭게 생각하고 있을 것이다. 레이저(laser)란 'light amplification by stimulated emission of radiation'이란 영어의 각 단어 머리자를 따서 조합한 합성어로서 우리말로 하면 '유도 방출 과정에 의한 빛의 증폭'이란 뜻이 된다. 일반적으로 레이저란 말은 레이저 빛을 발생하는 장치를 지칭하기도 한다.