metal-based 3D additive manufacturing technology은 기존 전통방식으로 제조가 불가능한 Three-dimensional cooling mold, Aircraft parts 등을 더욱 weight lightening 하는 방향, 그리고 Personalized medical parts 등 다양한 방식으로 활용할 수 있습니다. 즉, additive manufacturing technology을 이용하면 다양한 소비자의 욕구를 충족시킬 수 있는
uses a laser as the power source to sinter powdered material (typically metal).
The laser selectively fuses powdered material by scanning cross-sections generated from a 3-D digital description of the part.
After each cross-section is scanned, the powder bed is lowered by one layer thickness, a new layer of material is applied on top, and the process is repeated until the part is completed.
Metal layer을 형성, 이후 진행될 공정의 기반이 될 substrate층을 완성하려 한다.
Process Sketch Related Materials Related Hardware
(Chamber/Equipment) Note
Step1
Form Al2O3 Ingot
With CZ process ㅡ Al2O3 Czochralski Furnace Al2O3의 Polycrystal 을 사용한다.
Step2
Cutting & Grinding ㅡ Al2O3 powder / Glycerin Diamond grinder
Step3
Chemical etching HF-HNO3-
Variables
설정
global edge length
5 mm
maximum aspect ration
24.265
input parameter minimum
5
remesh area-gate
10mm(?)
no.of channels
8
distance bet.channel centers
30mm
distance to extend beyond part
150mm
channel diameter
10mm
far above and below the circuit
20mm
filling control
-injection time
1s
velocity/pressure switch over
-By % volume filled
99%
metal hydrides
Carbon nanotube (CNT)
Metal-organic Frameworks
MOF-5를 합성하고 X-ray 결정학으로 결정구조를 확인한다.
이 실험에서는 수소흡착과 다른 기체들의 분리/정제에 응용되는 Metal-organic frameworks (MOF)에 대해 공부하고 결정구조를 확인하는 법을 알게 된다.
MOF (metal-organic framework)
유기분자와 금속이