Like from the place where the water is high flowing with the low-end place it moves with the low-end place from the place where the advance guard who conveys is high. This time difference the advance guard the voltage.
Unit hour usual per 1 second possibility of the wave motion wave which passes one piece
1. 기존 PLANT 내의 제어실에 새로운 CONTROL SYSTEM 을 설치하고 기존 CONTROL SYSTEM 과의 DATA COMMUNICATION을 하려고 한다. 이때 고려해야할 사항을 설명하시오. 또한, OSI (Open System Interconnection) 7 Layer 에 대해 설명하고 TCP/IP 4계층과 비교 및 적용되는 Protocol의 예를 드시오.
① 이기종간의 제어시스템간의 데이타
angle is the range of oblique angle which we can see the normal screen. Unlike LCD, the image quality doesn't change though it is seen from just beside.
6. Fast response speed
If we play moving images, the quality of the screen is determined by the response speed. OLED shows natural screen of the moving images which have the similar level with that of the television.
7. High color property
2.3 C-V graph
The measured MOS capacitance (called gate capacitance) varies with the applied gate voltage.
① Measurement of C-V characteristics
-Apply any DC bias, and superimpose a small (15 mV) ac signal
-Generally measured at 1 MHz (high frequency) or at variable frequencies between 1KHz to 1 MHz
-The dc bias VG is slowly varied to get quasi-continuous C-V characteristics
② C-V chara
4. Equipment
4.1 RCA cleaning
RCA cleaning is a series of rinsing procedure prior to experiment with Si wafer. The purpose of the RCA clean is to remove organic contaminants (such as dust particles, grease or silica gel) from the wafer surface. There are three steps to be performed. The first step is to remove organic contaminant from surface of wafer. Second step is to remove any oxide layer