Fin Fouling
*팬에 의해 분해된 전체 공기흐름은 핀 관의 더러움에 상관없이 일정하게 남아있다.
*팬 분해압력은 핀 관의 더러움과 상관없이 일정하다.
*팬을 운전시키는 모터 위 에서 암페어 수는 핀 관의 더러움과 상관없이 일정하다.
-관을 더럽히는 외부물질 때문에 공기의
역 흐름이 증가함으
1. 설계목표
① 열펌프를 이용하여 공기를 원하는 온도 값에 도달시킨다.
② 열펌프를 이용하여 원하는 값에 도달하지 않을 경우 전열기를 이용하여 원하는 값에 도달시킨다.
③ 배출 공기로부터 열을 재활용하는 시스템을 구성한다.
④ 친환경적이면서 산업 표준에 맞는 냉매를 설정한다.
2.
1. Pump에서의 Cavitation (공동현상) 에 대하여 기술하고 이로 생길 수 있는 문제점과 그 방지책에 대해 논하시오
- Cavitation이란
유체가 넓은 유로에서 좁을 곳으로 고속 유입하거나 벽면의 요철, 만곡부 등으로 흐름이 직선적이지 못할 때 유체는 저압이 되고 포화증기압보다 낮아지면 기화되어 기포가
Economical requirement
1)Check the prices of pump and fittings, etc.
2)Set the elbow at the minimum
3)Choose suitable pipe considering pressure drop and prices.
4)Pressure drop and flow rate should be considered for deciding pump
5)Make a budget by adding up all the prices above
3. 냉각판의 설계와 해석 결과
Consider a cold plate fabricated from aluminum(k=190W/mK) with regularly spaced rectangular channels through which the water is passed.
Assume the top surface of the cold plate to be insulated. System reliability considerations dictate that the maximum cold plate temperature must not exceed 40℃.
(a) Determine h and calculate the pumping power.