quenching) : 마텐자이트(M), 복잡한 물건의 담금질.(고속도강, 베어링, 게이지) 퀜칭후 뜨임하여 사용한다.
* TTT 곡선(time temperature transformation diagram): 온도, 시간, 변태곡선
3) 표면 경화법
① 화학적 표면 경화법
ⅰ) 침탄법: 고체(목탄, 코우크스), 가스(CO,CO2,메탄,에탄,프로판), 침탄깊이 0.5~2mm
ⅱ) 시
Abstract
DSC is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference are measured as a function of temperature. Differential scanning calorimetry can be used to measure a number of characteristic properties of a sample.
Glass transitions may occur as the temperature of an amorphous solid is increased. Th
합금공구강은 탄소공구강에 Si, Mn, Ni, Cr, W, Mo 및 V등을 1~2종류 이상 첨가한 합금으로서 합금원소의 총량은 2~15%이다. 이러한 합금원소를 첨가함으로써 hardenability 향상시키고 동기에 cementite보다도 경도가 높은 특수 탄화물을 미세하게 분포시켜 내마노성을 증가시켜 준다. 공구강은 내마멸성 및 경도가
. PLA sample은 PLA 펠렛을 이용하여 PLA의 용융점보다 조금 높은 온도인 190℃로 유지한 hot press에 6.5mPa의 압력을 주어 얇은 필름을 만들고, 얼음물에 5분간 quenching하여 결정이 형성되는 것을 막는다. 그리고 만들어진 sample을 각각 다른 온도와 시간을 주어 결정이 형성되게 한 후 냉동실에 5분 동안 넣는다.