Scanning ElectronMicroscope)
Images are produced by scanning a focused electron beam across the surface of a specimen. In the most common mode, the low energy secondary electrons emitted are detected and used to modulate the brightness of a synchronously scanned CRT. Other signals can also be detected. X-rays, characteristic of that part of the specimen probed by the electron beam, allow bot
SEM?
Scanning electronmicroscope
To analysis surface of specimen
Qualitative analysis at certain point
Operation principal of SEM
Emission electron from filament
Accelerate electron by electric field
Focusing electron by lens → mono-chromatic electron beam
Generate secondary electron and etc.
Detection of electron
1. 목적
Mg-Ca alloy의 열처리 시간에 따른 기계적 특성 및 내식성을 평가한다.
2. 이론조사
2.1 Mg-Ca alloy의 일반적인 특성
Mg-Ca 합금은 Ca이 첨가됨에 따라 결정립의 크기가 작아지는 특성을 보이면서 경도, 강도가 강해진다. 또한 Mg2Ca가 Mg와 갈바닉 전지를 형성하여 합금의 내 부식성을 증가시킨다.
3.1.3 분석방법
➀ 측정된 XRD 데이터를 가지고 X축(2θ), Y축(강도)으로 그래프를 도식화 한다.
➁ 그래프 상의 peak의 위치(2θ)로 Bragg 각(θ)을 찾는다.
➂ 가장 강한 intensity를 가지는 3개의 peak의 Bragg각을 사용하여 면간거리(d)를 계 산한다. (2d sinθ = nλ)
➃ 3개의 면간거리를 JCPDS 데이터와
⑶ 소결
성형과정을 거친 분말은 분말 사이의 Mechanical한 힘 또는 Binder의 도움으로 결합되어 있는데 이를 열적활성화 과정을 통해 Particle간 결합을 형성시켜 더 이상 끊을 수 없는 하나의 덩어리를 만드는 과정이 소결과정이다.
작은 분말들 사이 하나의 덩어리가 되는 소결의 구동력은 높은 온도에