Bonding Test를 실시하여 Sn-Pb Solder와 Pb-Free Solder 간의 차이를 확인하고 Pb-Free Solder중에서도 각 재료마다의 Mechanical Bonding Test를 실시하여 Bonding Force를 체크한다. 보통 Soldering 된 제품이 받는 Stress 는 Tensile Stress 보다는 Shear Stress 가 주요하기 때문에 Solder 선택 시에는 Solder의 Tensile Property 보다는 Shear Pr
1. 얕은 기초의 파괴 형상
o 극한지지력(ultimate bearing capacity), qu : 기초를 지지하는 지반이 전단파괴가 일어날 때까지 받을 수 있는 압력
o 허용지지력(allowable bearing capacity), qa : 극한지지력/안전율
o 허용하중, Qa : 허용지지력 x 기초의 바닥면적
o 기초의 파괴 모드
- 전반 전단파괴(genral shear failure) :
position, skin thickness and taper ratio.
I Beam shape
4.2. I Beam
Beam theory shows that the I-shaped section is a very efficient form for carrying both bending and shear loads in the plane of the web. On the other hand, the cross-section has a reduced capacity in the transverse direction, and is also inefficient in carrying torsion.
4.3. Two spar structure
Two spar structure
Background of Experiment
□ Al-Si Alloy
AI + Si = Al-Si Alloy
1. Low melting point
2. light
3. Large heat capacity
4. Insoluble to each other
.
.
.
Result and Analysis - EDS
□ Composition Analysis
Al, Si is almost insoluble to each other at rsoom temperature.
All solid phase will have either 100% Al phase or 100% Si phase.
is a low cost alternative to propellers. Vertical impeller flocculator has high energy efficiency (it means less power is required) and has low shear stress (lower variation in G). Also it can compact flocs well and has less settling problem at the bottom. Direction of water flow by impeller rotation must be down to prevent settling, and motor is on the top of the tank for easy maintenance.