temperature profile with analytical solution
위 식에 필요한 값들을 대입하여 식을 나타낸다.
이 때 조교님께서 보내주신 데이터에서 101, 110, 113, 116번 채널의 값이 심하게 오류가 났기 때문에 이를 제외하였으며 106의 값 또한 값이 많이 튀었다. 따라서 이 채널들의 값은 주위 채널의 값을 통해 선형적이라 가
temperature of -4C. before the storage, synthesize EDC and NHS of which are each produced for 0.1M solution. spread EDS and NHS on the CNT surface which was activated by -COOH radicals, and store EDS-spread sample for 1 hour and NHS-spread sample for 2 hours under the low temperature. After all these prodecures, store the chip under the low temperature for 24 hours.
For analysis of the sensing p
temperature and duration time fixed at 150W,200 °Cand 15 minutes.
2.2. Characterization
The crystallographic information of the deposited films was obtained using X-raydiffraction (XRD) spectra (X’ pert PRO, Phillips. Eindhoven, Netherlands). The surface morphology and roughness of the films was observed by field emission scanning electron microscopy (FE-SEM, Model: JSM-6701F) and atomic
미소면적에 대해 대류에 의한 열의 손실을 고려하여 열전달식을 세워 보면,
---------- (1)
한편 미소변화량은 다음과 같이 나타낼 수 있다.
---------- (2)
(1), (2)에서
---------- (3)
Fourier's Law,
( Ac : Cross Sectional Area ) ---------- (4)
Newton's cooling law,
( As : Surface Area ) ---------- (5)
Surface Area ) ---------- (5)
를 대입하여 정리하면,
---------- (6)
⇒ ----- (7)
실험에서 사용하는 Fin은 Rectangular Fin이다.
따라서 단면적이 일정하므로,
--------- (8)
---------- (9)
로 정의하면 (8), (9)에 의해
where ---------- (10)
경계조건을
Fin 끝에서