Differential Method(FDM) 분석에서의 dx, dy size와 동일하므로 따라서 수치해석레포트 manual에 나와 있는 정보를 사용하였다. 실험 매뉴얼의 Fin 제원 정보를 통해서도 확인 가능하다.
온도 실험에 사용한 Fin은 Pure Copper로 이루어진 Thin Rectangular Fin으로써 2차원 형상을 가지고 있다. 이번 실험에서는 Fin의 가열
temperature difference)ΔT이다.
그림 1에서와 같이 ΔT는 관의 길이에 따라 상당히 변한다.
그리고 열속이 ΔT에 비례하기 때문에, 열속 역시 관 길이에 따라 변하게 된다. 그래서 미분식을 사용할 필요가 있다.
이 미분식은 국부 온도차 ΔT하에서 미분 면적 dA에서 미분열흐름 dq가 일어남을 표시하게 된다.
Temperature different between inlet and outlet 이다.
2.열교환기의 종류
(1) 기학학적 형태에 따른 분류
1) 원통다관식 (Shell&Tube) 열교환기
가장 널리 사용되고 있는 열교환기로 폭넓은 범위의 열전달량을 얻을 수 있으므로 적용범위가 매우 넓고, 신뢰성과 효율이 높다.
2) 이중관식(Double
temperature, pressure and volume. All these graphs
are plotted using the Matlab program.
Through this design project, we find that the experimental values of
critical properties of dibromoethane are actually different from the actual
values that are found from the handbook or the internet data column.
These differences could be seen from the graphs plotted. From the
results obt
Abstract
DSC is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference are measured as a function of temperature. Differential scanning calorimetry can be used to measure a number of characteristic properties of a sample.
Glass transitions may occur as the temperature of an amorphous solid is increased. Th