1. 인장시험의 목적
인장시험은 재료에 인장하중이 가해졌을 때 변형량이 얼마나 되는 가를 측정하여 재료의 변형에 대한 저항의 정도를 측정하는 것이다. 인장시험을 통해서 얻을 수 있는 재료의 기계적 성질은 탄성변형에 대한 저항력인 종 탄성계수(Elastic Modulus)와 항복강도(Yield Strength), 소성변형
Abstract
Bioethanol is one of the alternative sources of oil resources which received attention with biodiesel. Many countries produce bioethanol from food sources such as corn and sugarcane, but it causes food-energy conflicts and farmland problem. So it needs to focus on new biomass which is sustainable, renewable, cost-effective and do not occurred any conflicts. Algae are one of the bioma
1. 실험목적
① 시편을 일정한 속도로 일축방향으로 인장력을 가하여 재료의 항복점, 인장강도, 연신율, 단면수축율 및 하중과 연신량선도 등의 기계적 성질을 평가한다.
② 비례한도, 탄성한도, 탄성계수등과 같은 물리적성질을 이해하고 기계설계의 기초자료로 이용할 수 있다.
③ 인장에 대한 변
Strain rate를 함께 고려하여야 한다.
3. Shear properties
Shear Property인 Shear Modulus 와 Shear Strength는 위의 인장강도 측정에서 측정된 Elastic Modulus 를 사용하여 다음의 식
......................................... ⑴
을 이용하여 구해 낸다. 는 Shear Modulus, 는 Elastic Modulus, 는 Poisson's ratio
가지는 고유한 특성(Material Property)으로서 물리적으로는 외부의 하중으로 발생하는 수직 변형에 대해 물질이 가진 저항으로 해석된다.
③ 인장 강도, 극한 강도 (B : Ultimate strength) : 시편에 가하여진 최대 하중을 원래의 단면적으로 나눈 값, 즉 재료가 지지할 수 있는 최대 응력을 인장 강도라 한다.