2) 대류 열전달계수(coefficient of convection heat transfer)
매뉴얼에 주어진 h값의 표를 보간하여 이번 실험에서 사용할 대류 열전달계수(coefficient of convection heat transfer) h를 구하도록 하겠다. steady state에서의 온도는 다음과 같이 주어진다.
22.63°
41.3°
26.9°
위의 값들을 이용하여 매뉴얼에 주어진 표
coefficient값의 문제점.
Convection heat transfer coefficient가 일정하다고 생각했으나 실제실험에서는 조원들의 움직임이나 실험실 문의 여닫음에 의해서 Forced convection이 일어났을 가능성이 있다. Forced convection이 일어나지 않았다고 생각하더라도 Free convection시에 온도구배에 의해서 실제로 Convection heat transfer co
원통 주위 유동의 유동 함수 :
속도장 :
위의 두 식을 0으로 두고 r과 에 관해서 풀면 두개의 정체점 위치를 찾을 수 있다.[(r, )=(R, 0) and (R, π)] 이 정체점을 통과하는 유선방정식은 유동함수에 각 점의 좌표를 대입하면은 된다. 두 정체점의 좌표를 대입한 값은 모두 =0을 산출한다. 이는 모든 값에서 r=R
보고자 하였다.
2. System
눈
양모
그림1. 시스템의 입체적 모식도
그림 2 시스템의 평면적 설명
Basic assumption
1. Uniform property for conducting materials
2. Only 1-dimensional heat transfer
3. No convection heat transfer occurs in the system
4. No radiation, No production of heat
5. Perfect thermal contact
Able to dissipate limited amount of heat flux.
Lower coefficient of performance than vapor-compression systems.
Relegated to low heat flux applications.
More total heat to remove than without a TEC.
▪ Mini contact : TEC – Silicon Chip
▪ Concentrating the TEC Power on a Small Area
▪ TEC with 20μm-thick Bi2Te3
▪ 10W
▪ 1250μm x 1250μm Copper Mi