water flow direction, inlet locates downside and outlet locates upside.
Through this, we can know that axial impeller is not suitable. Also, because of wide width of tank, it has poor mixing.
Second, there is a problem with chemicals. PAC is injected with Cl2, so activation of Cl2 must be restricted.
Also, using alum may cause settling.
Alum lowered pH in localized area. To overcome this
II. How is CBM formed
Coalbed methane (CH4) forms in one of two ways. During the earliest stage of coalification (the process that turns plant detritus into coal), biogenic methane is generated as a by-product of bacterial respiration. Aerobic bacteria (those that use oxygen in respiration) first metabolize any free oxygen left in the plant remains and the surrounding sediments. In fresh water
water, those free complex carbohydrates turned into fermentable sources through pre-treatment process - saccharification. Then, it can be changed ethanol form through fermentation by yeast or genetically engineered E.coli and we can produce biofuel from that ethanol. Now, the way of decreasing process and cost are studied from a few researchers. So we will show the whole process of the production
Density of steel 7800
Poisson’s ratio 0.32
The resultant data(velocity) = 5666.7
From this formula, we could determine the modulus of elasticity,
Theoritical value of E of steel is 200GPa, error would be
Fig.1 Property of materials.
2. Considerations
We could figure out material's properties and method of finding defect of the specimen. Ultrasonic wave value was alm
water and recycled activated sludge are introduced typically at several points in the aeration tank. The organic load on the aeration tank, MLSS concentration, and oxygen demand are uniform throughout the tank. An advantage of the CMAS process is the dilution of shock loads that occur in the treatment of industrial wastewaters. The CMAS process is relatively simple to operate but tends to have lo