Ⅰ. 개요
우리 경제는 급속한 발전과 구조변화를 이룩하여 왔다. 실제 공업부문은 연평균 16.4%의 실질 성장을 실현하여 한국 경제 의 고도성장을 주도하였으며, 세계수준에서도 가장 높은 성장실적을 기록하였다.
한국산업의 발전은 정부 주도형 산업정책과 수출 지향적 개발전략에 크게 의존하였다
* Deep penetration welding
충분히 높은 에너지 밀도에서 레이저 빔은 작업 공간에 있는 재료의 소재의 표면이 기화하기 시작하는 정도까지 열을 가하게 된다.
레이저 자극은 대략 106 / cm2 을 넘어서야 한다. 재료의 기화가 됨에 따라서 사라지는 금속수증기의 압력의 결과 키홀(keyhole)은 소재에 생성된다. 기
보는 것과 같이 용접금속부와 열 영향부의 폭이 넓어진다.
No
Laser
Beam diameter
Material
Welding speed
1-1
Fiber
0.17mm
Al-Si coated
13.5m/min
1-2
CR
2-1
Disk
0.25mm
Al-Si coated
12m/min
2-2
CR
3-1
Fiber
0.36mm
Al-Si coated
11m/min
3-2
CR
4-1
Disk
0.54mm
Al-Si coated
6.5m/min
4-2
CR
표 레이저 빔 직경에 따른 최대 용접 속도
speed, and therefore would be a significant advantage in some manual labor jobs.
Other tasks that people perform are incredibly dangerous, and often cause life long injuries, or much worse as to kill people. If these types of jobs were performed by machines, there would be far fewer work-related injuries and deaths. A prime example is deep sea welding on oil platforms. Every year there are many d