scanning a focused electron beam across the surface of a specimen. In the most common mode, the low energy secondary electrons emitted are detected and used to modulate the brightness of a synchronously scanned CRT. Other signals can also be detected. X-rays, characteristic of that part of the specimen probed by the electron beam, allow both a qualitative and quantitative determination of the ele
SEM?
Scanning electron microscope
To analysis surface of specimen
Qualitative analysis at certain point
Operation principal of SEM
Emission electron from filament
Accelerate electron by electric field
Focusing electron by lens → mono-chromatic electron beam
Generate secondary electron and etc.
Detection of electron
ㆍ우심방으로 카테터 삽입 → 특수바늘을 이용하여 심방중격을 통해 좌심방으로 도관 진입 ⇒ 좌심방, 좌심실, 대동맥의 압력 측정, 혈액채취, 승모판막과 대동맥판막의 구조 확인
ㆍ카테터를 통해 조영제와 지시약을 좌심실 내 주입 ⇒ 혈류의 흐름, 심실벽의 운동 성과 두께, 좌심실 이완기말 용량,
3.1.3 분석방법
➀ 측정된 XRD 데이터를 가지고 X축(2θ), Y축(강도)으로 그래프를 도식화 한다.
➁ 그래프 상의 peak의 위치(2θ)로 Bragg 각(θ)을 찾는다.
➂ 가장 강한 intensity를 가지는 3개의 peak의 Bragg각을 사용하여 면간거리(d)를 계 산한다. (2d sinθ = nλ)
➃ 3개의 면간거리를 JCPDS 데이터와
Ⅰ. 현미경과 위상차현미경
빛 파장의 회절과 간섭의 지식을 응용해서 위상의 차이들을 진폭의 차이들로 전환. 균일한 광원으로부터 표본에 의해 회절된 빛이 물리적으로 분리된다. 회절되지 않은 빛의 상은 그것의 광경로의 기계적 조절로 변동된다. 작은 양의 회절되지 않은 빛은 일반적으로 흡수