material flows from the left side to the right side. The material flow is from the suppliers who provide materials and subassemblies, to the manufacturers who build, assemble, convert, or furnish a product or service. The finished products are then passed to the distributors who transport and deliver it to the customers. While material flows from left to right, that is from suppliers to manufactu
the other hand, shortcoming is
1) withstand to Apchukryeok, force that press, but is weak in tensility, force that pull.
2) because weight is high than strength, weight of building is heavy.
This is repletion fairly by high-strength concrete and light weight concrete development, use.
3) expense that construction period (term of work) is prolonged and makes mold by use of mold much Deum .
building design. So they have problem that can’t control environmental quality level change by utilizing of occupants. Also, they concentrate to physical factors for securement of environmental-friendly materials and skills and overlook the aspect of users in criteria. Like this, Green Building Certification have overlooked the users and process of using.
From these problems, this study will
building up Variant C which was claimed as a ground for material breach. Slovakia believed there was ‘the principle of approximate application’ in international law. A state can take a measure which is most appropriate to realize an object of a legal agreement if it is impossible to achieve the purpose because of a counter party’s negligence. In accordance with Slovakia, the principle is re
amount, and the process is repeated. In order to build an object the controlling drawing for each layer changes very slightly.
Typical standard manufacturing methods are subtractive, that is material is removed from a base form by machining with a lathe, with a drill, by cutting, planing or broaching. By contrast 3D-printing is an additive process, because material is added, layer by layer.