2.4. Bonjean Curve
많은 학생들이 Bonjean Curve 에 대해 답을 하지 못하였다고 하셨다. 우리 조원들도 이 문제에 대해 거의 답을 하지 못하였다고 했다. Bonjean Curve는 부력의 개념이다.
그림 Bonjean Curve
임의의 수선에서 횡단면의 면적은 Simpson's 1st Rule 같은 방법으로 구할 수 있고 이를 수선변화에 따른 곡
critical properties of dibromoethane are actually different from the actual
values that are found from the handbook or the internet data column.
These differences could be seen from the graphs plotted. From the
results obtained, we can conclude that there are many possibilities that
might influencethe experiment data such as systematic error or zero
error and random error. These er
. 그 값을 받아준 요소가 2차 방정식의 각 계수가 되므로 그것을 통해 plotting을 실시할 때 2nd order equation으로 plotting을 해주면 된다.
a= data(1)
b= data(2)
c= data(3)
for i = 1:n
y_plot(i)=a*x_plot(i)^2+b*x_plot(i)+c;
end
- 이와 같은 방식으로 Plotting을 하면 4th order까지 검량선을 그려낼 수 있다. Calibration을 위한
2.2.3. 두 방법의 차이점
앞에서 Euler Formular의 가정으로 Perfect한 column을 이야기 했는데, 현실에서는 column이 완전히 straight 하지 않고 manufacturing imperfections으로 이하여 완벽하게 homogeneous 하지도 않으며, 힘이 정확하게 column axis에 가해지지 않는다는 문제점이 있다. 실제로 Euler Formular를 이용해 Critical Load
1. 목 적
고분자 재료의 가장 기본적인 기계적인 특성을 알아내기 위해서는 재료에 응력을 가한 뒤, 이에 따른 변형률을 측정하여 stress-strain 곡선을 구하는 것이 가장 일반적인 방법이다.
재료에 가하는 힘(load)의 유형에 따라 인장(tensile), 굴곡(flexural), 압축(compression), 전단(shear)등으로 나눌 수 있