Convection heat transfer coefficient값의 문제점.
Convection heat transfer coefficient가 일정하다고 생각했으나 실제실험에서는 조원들의 움직임이나 실험실 문의 여닫음에 의해서 Forced convection이 일어났을 가능성이 있다. Forced convection이 일어나지 않았다고 생각하더라도 Free convection시에 온도구배에 의해서 실제로 Co
2) 대류 열전달계수(coefficient of convection heat transfer)
매뉴얼에 주어진 h값의 표를 보간하여 이번 실험에서 사용할 대류 열전달계수(coefficient of convection heat transfer) h를 구하도록 하겠다. steady state에서의 온도는 다음과 같이 주어진다.
22.63°
41.3°
26.9°
위의 값들을 이용하여 매뉴얼에 주어진 표
heat flux는 일정하다. 따라서 다음의 미분방정식이 성립한다.
여기서 가 에 관계없는 상수라고 가정하면 는 다음과 같이 의 함수로 나타낼 수 있다.
, * Boundary conditions
따라서 다음의 간단한 열전도 방정식이 나온다.
(2) With Heat loss caused by convection
Fin의 경우, 대류에 의한 열의 손
heat sinks for the LCD TV by adequate natural convection flows, some numerical investigations have been performed. Heat generation rate of the LED panel, temperature distributions of heat sinks and of the surrounding air were properly assumed for the numerical heat transfer analysis.
As the results, surface area, the heat transfer coefficient, the heat performance, and optimum fin spacing of th
Heat flow)
물질 내에서 온도구배(Temperature gradient)가 존재하면 언제나 발생되며, 열 흐름을 계산하기 위해서는 필연적으로 온도분포를 알아야 한다. 열 흐름을 이해하는 데는 서로 다른 세 가지 열 흐름 메카니즘을 고려하는 것이 보통이다. 즉 전도(Conduction), 대류(Convection), 및 복사(Radiation)가 그것이다.