Diffusion
물질의 확산은 1855년 Adolf Fick에 의해 유도된 Fick’s Law 를 따르며 이는 다음과 같이 표현된다.
J= -D ∂C/∂x
∂C/∂x= Concentration gradient in the x-direction [M/s]
J=Diffusion flux across unit are at right angles to the x-direction [ mol/(s∙cm^2 )]
D=Diffusion constant [ cm^2/s]
여기서 – 부호는 흐름이 높은 농
1. Justifications of the proposed schemes -the structural problem& the chemical injection locations
2. Design impeller and tank type affecting energy efficiency, cost, flocculation size. Design Diffuser Walls and Baffles used for Minimizing Short Circuiting
3. Design launder type, structure, sludge and scum model
Filtration의 세번째 key concept 이유: (to promote readily biodegradabl
1.1 Soft lithography
Microstructure나 nanostructure을 만들기 위한 printing, molding의 과정을 포함하는 technique으로, 일반적으로 printing, molding, transfer의 3단계 과정을 거친다.
1.1.1 Printing
Master를 만드는 과정이다. Photolithography, e-beam, micro-machining, photoresist 등 다양한 방법을 통해 원하는 모양을 가지는 master를 제작할
4. Bradford Assay
- Bradford Reagent는 95% ethanol, 88% phosphoric acid, Brilliant Blue G로 이루어져 있다. Ethanol은 유기용매이기 때문에 coomassie blue를 Bradford reagent 내에 잘 용해 시키고, phosphoric acid는 reagent가 산성 조건을 충족시키게 한다. 산성 조건 하에서 Coomassie blue는 doubly-protonated red form이 되기 때문에 6개의 phenyl grou
③ K conductance가 resting values때보다 크게 증가할 경우를 가정할 경우, 세포 내 K농도, K에 대한 total electrochemical potential, 막전압은 어떻게 될 것인지 설명하시오.
g(K)가 0.35 mS/㎠ 에서 10.00 mS/㎠ 로 크게 증가할 경우,
세포 내 K 농도 : 149.9999144 meq/L → 149.9999089 meq/L
K 에 대한 total electrochemical potential : -6 mV →