-Conclusion & Discussion
Poisson's ratio is derived by dividing the horizontal strain modulus by perpendicular strain modulus. Poisson's ratio is a characteristic value of materials, and concretes have 0.16∼0.22 of it. The Poisson's ratio from the first experiment is 0.18 and this is comprised in the range of theory, and the value from the second experiment is 0.16 which also comes under th
-결과 및 토의
1. 압축강도 실험 중 첫 번째 실험은 12.6% 만큼 강도가 작게 발현 되었으나 두 번째 실험에서는 0.8%의 오차로 이론값과 매우 가깝게 나왔다. 같은 콘크리트를 썼으나 이렇게 두 실험에 차이가 나는 원인은 다짐 문제이다. 실험 당일 각 공시체마다 다른 사람이 다짐을 해서 약간의 차이가
① 소성수축 균열
시멘트-페이스트는 경화할 때, 절대체적의 1%정도가 감소하게 된다. 이에 따라 소성상태에 있는 콘크리트의 체적이 감소하게 되는데, 이를 소성수축이라고 하며 콘크리트에 부분적으로 인장력을 유발시키는 원인이 된다. 특히, 타설 후 외기에 접하는 콘크리트 표면으로부터 수분
1 and 2 was in range of theoritical value. This shows there was proper uniformity in between well attached strain gauge and cylinder.
- Shear strength compressive strength of cylinder 1 and compressive strength of cylinder 2 measured by using shear strength of cylinder.
- Dryshrinkage showed 13.56% of error by limitation of measuring tools, however, we could find out shrinkage of concrete.
1) 공정 Process 조건 확립 및 개선 업무
2) 공정 장비 Set up 업무
(1) Silicon FAB 공정(MEMS) – Dry etcher(Main), Sputter (Main), Spin track(Sub), Wet Station(Main)
Chip Bonder, Flip Chip Bonder(Main) , Laser(Sub), Plating(Sub) , Dicing saw (Sub)
(2) LED/반도체 FAB 공정 – Wet Station(200mm) / Single(300mm) Cleaning / IPA D