2. Summary
The main purpose of conducting this thermodynamics design project
is to determine the relationship between three gas laws which are the
Ideal gas law, Van Der Waals equation ofstate and Redlich-Kwongequation
ofstate. Using a given chemical substance, which is the dibromoethane,
we can simply find out the relationship between those three gas laws.
The relationship ar
▧ van der Waal's Equation ofState
우리는 일반적으로 이상기체의 경우를 가정하여 PV = nRT 라는 이상기체 방정식을 사용한다. 허나 이 식을 일반기체에 적용시킬 경우, 오직 고온 고압의 경우에만 어느 정도 실제 측정치와 일치되는 값을 갖는데, 이는 해당 방정식이 ①분자간의 상호작용인 인력이나 반발력
수 있음을 보여주었다.
그 외에도 수업시간에 배운 내용을 바탕으로 조사 자료와 Maxwell Construction을 통해 구한 증기압을 이용해 simple fluid와 비교하여 직접 Acentric Factor를 구해 알려진 Acentric Factor값과 비교해보았고, Antoine Equation을 통해 자료의 타당성을 검증하는 작업도 추가적으로 실시하였다.
stateof gases)
- 물리적 상태(조건) : 물리적 성질로 정의. 동일한 성질 = 동일한 상태
예) 순수한 기체의 상태 표시(명시)
부피(V), 몰 질량(몰수 n), 압력(P), 그리고 온도(T) --> 변수들
---> 세 변수(충분)로 나머지 한 변수는 결정(실험적 확인)
- 순수한 상태 표시 : 4개의 변수를 연관 시키는 식 --> 상태 방정
I. Preliminaries
Consider two dimensional initial value problems
where is an instant time and .
Then and define the parametric equations of a curve in -plane called the phase plane. This curve is called a path. A constant solution is called an equilibrium (or steady-state solution). Such a solution does not define a path in the phase plane, but rather a point. The point that satis