process often used for sea water desalination
MED consists of multiple stages or "effects“. In each stage the feed water is heated by steam in tubes
MED purifies water through the use of heat, to “boil” off and re-capture the pure water over a number of cycles or “effects”, leaving the unwanted solids behind
Each stage essentially reuses the energy from the previous sta
1. 배경
(1) Endostatin이란
암은 그 치료의 어려움때문에 인류가 해결해야할 난제로 여겨져 왔다. 암이란 발암물질, 바이러스 또는 유전적 변이로 인해 비정상적으로 증식한 세포의 덩어리이다. In vivo에서의 암의 특징으로 나타나는 점은 조절되지 않은 증식을 하고, apoptosis를 하지않으며 자체적으로 혈
1. Justifications of the proposed schemes -the structural problem& the chemical injection locations
2. Design impeller and tank type affecting energy efficiency, cost, flocculation size. Design Diffuser Walls and Baffles used for Minimizing Short Circuiting
3. Design launder type, structure, sludge and scum model
Filtration의 세번째 key concept 이유: (to promote readily biodegradabl
Ⅲ Flocculation
The purpose of flocculation is to uniformly mix coagulated water to produce either settleable or filterable floc and accelerate the rate of particle collisions, causing the agglomeration of electrolytically destabilized colloidal particles into settleable and filterable sizes.
Considerations of flocculation are:
1. Baffling to prevent of flow short-circuiting
2. Tapered
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*Separate Electric furnace and other system like Electronic scale
-Because Electric furnace temperature is very high
so we need to protect other system.
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*N