heatresisting plastics
이전에는 내열플라스틱이라고 하면 실리콘계·플루오린계·페놀수지계 등을 생각하였으며, 400℃ 미만의 내열성을 나타내는 데 불과하였다. 근래 성능이 우수한 각종 내열플라스틱이 개발되어 사용되고 있다. 특히 우주개발시대를 맞이하여 그 발전이 촉진되고 있는데, 몇 가지 예를
Heater기의 정도2로 5분간 가열한다.
가열 후, 2분30초의 온도와 5분후의 온도를 각각 측정한다.
④
우유팩안의 물의 초기 온도를 측정한다.
재질2mm를 Heater기의 정도2로 5분간 가열한다.
가열 후, 2분30초의 온도와 5분후의 온도를 각각 측정한다.
⑤
우유팩안의 물의 초기 온도를 측정한다.
We investigated graphene-based transparent electrodes for InGaN/GaN light emitting diodes(LED). Nano-dotted layer of Ag and Ni were inserted between p-GaN and graphene to achieve low contact resistance and high transmittance. Heat treated Ag layer/graphene had low contact resistance of 0.7~1.2Ω/cm2, and we could achieve better luminance for GaN-based LED. However, for patterned Ni layer/graphene
size formation
↓
Thin layer is maintained
uniformly
▼ View from Above
A large number of
compact pipes
Make the
Surface area Larger
▼ View from Side
Fin
Thin and insulated panel
Fix the pipes
make cooling space with air
between the fins
Titanium
Light weight↓
High thermal conductivity↑
High strength↑
High corrosion resistance↑
Heat-Nano Imprint Lithography)
나노 임프린트 리소그래피는 크게 두 가지의 방법이 있는데, 첫째는 열가소성 수지 레지스트에 열을 가해서 패턴을 찍어낸 다음 냉각 시키는 방식을 사용하는 열 나노 임프린트 리소그래피 (Heat-Nano Imprint Lithography)이다. 이는 열 전사, 또는 Hot Empossing공정이라고도 하며 1996