Background of Experiment
□ Al-Si Alloy
AI + Si = Al-Si Alloy
1. Low melting point
2. light
3. Large heat capacity
4. Insoluble to each other
.
.
.
Result and Analysis - EDS
□ Composition Analysis
Al, Si is almost insoluble to each other at rsoom temperature.
All solid phase will have either 100% Al phase or 100% Si phase.
Mechanical Property의 측정으로 여러 Solder 재료들을 비교해 보겠다.
먼저 Solder Ball과 PCB 기판과의 접착력 Test를 위해 Mechanical Bonding Test를 실시하여 Sn-Pb Solder와 Pb-Free Solder 간의 차이를 확인하고 Pb-Free Solder중에서도 각 재료마다의 Mechanical Bonding Test를 실시하여 Bonding Force를 체크한다. 보통 Soldering 된 제품
Keff, Km, Kp : the effective thermal conductivities of the composite,
Metal matrix, Particles
φp : the volume fraction of reinforcements
a : the diameter of the reinforcement
- hc : the boundary conductivity.
Advantage
The air travels across the short
length of the fins laterally, rather than longitudinally down
the long length.
Focused on placing
properties
인장 강도의 측정은 재료에 인장응력을 가해 견디는 강도를 측정한 것이다. 인장응력은 온도의 영향을 많이 받기 때문에 실험은 모든 재료가 같은 온도 하에서 실시되어야 한다. 또한 극한 UTS 측정시에는 온도와 Strain rate를 함께 고려하여야 한다.
3. Shear properties
Shear Property인 Shear Modulus
In describing the answer to the question below, try to share your opinions on the basis of evidences such as articles and books. Also provide information of the evidence (author, title, journal name, etc.).
1. Explain what happens in terms of mechanical/chemical properties when making products using metal-based 3D additive manufacturing technology. (10 points)mechanical properties
전통적