이 실험은 Wetted Wall Column을 이용하여 물과 공기를 접촉시켜 그 농도차로부터 물질전달 계수를 계산하는 것이다. Wetted Wall Column은 물질전달이 일어나는 경계면이 뚜렷하며, 그 면적을 계산하기 쉽다는 점에서 물질전달 계수를 계산할 수 있는 명확한 방법이 된다. 물속에서 산소의 확산계수를 구함으로
transfercoefficient)
직렬 고체층을 통과하는 열속 (heat flux)은 구동력, 즉 총괄 온도차 ΔT에 비례한다.
열 교환기에서 구동력은 Th-Tc로 택할 수 있다. 여기서 Th는 뜨거운 유체의 온도이고, Tc는 찬 유체의 온도이다.
Th-Tc항을 총괄 국부 온도차 (overall local temperature difference)ΔT이다.
그림 1에서와 같이 ΔT
oxygen demand are uniform throughout the tank. An advantage of the CMAS process is the dilution of shock loads that occur in the treatment of industrial wastewaters. The CMAS process is relatively simple to operate but tends to have low organic substrate concentrations(i.e., low F/M ratios)that encourage the growth of filamentous bacteria, causing sludge bulking problems.
< Requirement &
Calculations of the design of each unit operations
Flowrate
Present Average Flowrate = 4220 m3/d
Water use per capita = 4220/15000 = 0.281333 m3/d capita
Population after 10 years = 15000 Χ 1.0310 = 20158.75 ≒ 21000 capita
∴ Average Flowrate = 0.281333 Χ 21000 = 5908 m3/d ≅6000m3/d
Peak Flowrate = 5908 Χ 1.5 = 8862 m3/d ≅9000 m3/d
Screening
Conditions
Cle
서론
실생활에서 이루어지는 대부분의 화학공정은 유체 상태의 반응물을 기초로 이루어진다. 이는 유체의 균질성 및 비교적 편리한 활용성에 의한 경우가 많으며 이외에도 유체의 여러 가지 성질은 공정의 모델 및 설계에 큰 영향을 주는 변수가 된다. 한편 이러한 유체의 성질 중 가장 핵심적인 것 중