filter. A filter seems to be simple, but there are many considerations to design filter. In this paper, we design microstrip bandpass filter which has bandwidth of 500 MHz and center frequency of 2.5 GHz. Alumina is used as substrate, and chromium is used as conductor. Final results are achieved as follows. Insertion loss at 2.25 GHz is 2.28 dB. Insertion loss at 2.75 GHz is 2.33 dB. Attenuation
Data Terminal Equipment'의 약자로서, 통신 회선의 시작 부분과 끝 부분에 위치한다.
· 사람과 기계의 중간 다리 역할을 수행하며 예로 컴퓨터가 모뎀을 사용해서 전화선을 통해 인터넷에 연결되어 있을 경우 컴퓨터는 단말 장치에 해당한다.
나. 데이터 회선 종단 장치(DCE)
· 'Data Circuit Terminating Equipment'의
3D printing
3D printing or additive manufacturing (AM) refers to any of the various processes for printing a three-dimensional object. Primarily additive processes are used, in which successive layers of material are laid down under computer control. These objects can be of almost any shape or geometry, and are produced from a 3D model or other electronic data source.
Basic principles
If the
□ 실험 목적
○ 가속도계를 이용하여 진동 측정 실험을 수행.
○ 측정된 데이터를 Time domain, Frequency domain 별로 비교 분석
□ 이 론
○ 진 동
- 어떤 물체가 기준 위치에 대해 반복운동을 할 때 그 물체는 진동한다고 말함.
같은 시간 간격으로 되풀이 되는 모든 운동을 주기운동 혹은
1. Purpose
이번 실험에서는 단백질 칩의 제조기술을 알아본다. 본 과정은 박막의 형성과 기판 상에 제작된 박막의 확인, 그리고 microarray를 이용하여 완성된 단백질 칩의 형광 분석법을 통한 활성의 확인, 이렇게 두 단계로 나누어져 있다. 이를 통해 기초적인 단백질 칩의 제조기술과 형광스캐너의 사