ultrasonic signal can be obtained. In contact ultrasonic testing a thin film of oil, glycerin or water is generally used between the transducer and the test surface.
When scanning over the part or making precise measurements, an immersion technique is often used. In immersionultrasonic testing both the transducer and the part are immersed in the couplant, which is typically water. This method of
Density of steel 7800
Poisson’s ratio 0.32
The resultant data(velocity) = 5666.7
From this formula, we could determine the modulus of elasticity,
Theoritical value of E of steel is 200GPa, error would be
Fig.1 Property of materials.
2. Considerations
We could figure out material's properties and method of finding defect of the specimen. Ultrasonic wave value was alm
Ⅰ. 입자 운동
유체는 흐르거나 멈춰있는 기체나 액체이다. 특히 기계적 분리에서는 유체중의 고체입자 또는 액적의 운동이 관여되며, 이와같은 운동에 대해 알 필요가 있다. 기체나 액체 등 유체속에서의 입자운동은 역학적으로 쉽게 설명될 수 있다.
1. 유체내에서의 입자의 운동
어떤 유체내에서
완전 소성 재료의 구성방정식으로써 널리 사용되는 것은 대체적으로 최대 비틀림에너지기준(von Mises yield criterion)이다. 또한 최대 전단응력기준과 최대 비틀림에너지기준 모두 응력결합 하에서의 점탄성(viscoelastic) 현상의 해석에도 사용된다. 이러한 생각을 확장하면 변형률-경화 재료(strain-hardening mater
1. Introduction
1) Definition of preservation and food-spoilage micro-organisms
Food preservation is the process of treating and handling food to stop or greatly slow down spoilage (loss of quality, edibility or nutritive value) caused or accelerated by micro-organisms. Some methods, however, use benign bacteria, yeasts or fungi to add specific qualities and to preserve food (e.g., cheese, wine