Density of steel 7800
Poisson’s ratio 0.32
The resultant data(velocity) = 5666.7
From this formula, we could determine the modulus of elasticity,
Theoritical value of E of steel is 200GPa, error would be
Fig.1 Property of materials.
2. Considerations
We could figure out material's properties and method of finding defect of the specimen. Ultrasonic wave value was alm
velocity), 압력(pressure), 에너지(energy) 등의 물리적인 의미와 관계를 살펴보고 Bernoulli's equation에서 가정한 것은 무엇이며 그 가정은 실제 실험 결과로부터 타당한 것이었는지를 판단해보는 것이 이번 실험의 목표이며 핵심이라고 볼 수 있다.
실험에서 실제로 사용되는 장치는 수력학적 모델 중 Bernoulli's
Gear A is constrained to roll on the fixed gear B but is free to
rotate about axle AD. Axle AD is connected by a clevis to the
vertical shaft DE which rotates as shown with a constant angular
velocity 1. Knowing that gear B rotates with a constant angular
velocity 2, determine (a) the angular velocity of gear A (10점), (b) the
angular acceleration of gear A (10점).
Velocity)라 한다. 수중에서 입자가 침강하기 시작하고부터 종말 속도에 도달할 때까지의 시간은 매우 짧아서 보통은 입자가 처음부터 종말속도에서 침강하는 것으로 해도 지장이 있다.
결과적으로 정지액 중 현탁되어 있는 입자가 높이 H[cm]의 정지액체 중을 침강하는데 요하는 시간을 θ[s]라고 하면 Stok
1.실험목적
실험을 통해 대류열전달의 기본 법칙와 특성들을 확인해 보고 가열된 평판(Flat plate),Pin판 또는 Fin판 위에서 자연대류와 강제 대류일 때 열전달의 차이를 알아보기 위해 다음과 같은 실험을 수행한다.
1)수직 평면에서의 자연대류(free convection from a vertical flat surface)
2) 수직 평면에서의 강제