2. 표면처리 (전처리)
도료는 도장을 하기 위한 제품에 불과하며 도장 작업에 관계없이 도료의 품질에 따라 도장효과가 좋게 나타나는 것은 아니다. 도장 효과(도막 성능)에 미치는 도료의 기여도는 5%에 불과하며 나머지 95%는 여러 가지 도장에 관계되는 기타 인자 (표면처리도, 도장 환경, 도막 두께,
water is heated by steam in tubes
MED purifies water through the use of heat, to “boil” off and re-capture the pure water over a number of cycles or “effects”, leaving the unwanted solids behind
Each stage essentially reuses the energy from the previous stage.
majority of water must be pumped from its source or directed into pipes or holding tanks
to remove large debris suc
기관의장 설계 편
A. 기장설계의 정의
조선소에서 하는 선박의 기관부(機關部) 관계의 설계와 공작. 기관의장 설계라고 하면 일반적으로 배관설계를 말하는 것인다. 구체적으로 기관배관SYSTEM, 기관배관, 기장철의장, 기장 축타 설계로 구분이 된다.
B. 기장설계 업무
기장설계는 “기관실에 대한 의
Cause of Occurrence
- Large suction head of pump.
- Large friction loss of pump.
- High velocity of impeller of pump.
- Position of pump is higher than fountainhead.
Solution
- Make suction head and friction loss small.
- Make the velocity of impeller small.
- Install the pump lower than fountainhead.
- Use double suction pump.
- Control the water pressure inside tube
사용방법에 따라 조금씩 차이가 난다. 또한 작동 원리에 따른 분류로는 크게 positive displacement 펌프와 entrapment 펌프로 나눌 수 있다.
- positive displacement 펌프 : 기체를 진공 용기 외부로 제거하는 펌프로 로터리 펌프(rotary vane pump), 터보 분자 펌프(turbo-molecular pump) 등 대부분의 기계적인 펌프