material)에서도 기준의 적용이 가능하다.
(2) 취성재료의 파괴기준 (Fracture criteria for brittle material)
ⅰ. 최대수직응력기준 (Maximum normal stress criterion)
취성재료는 사전의 항복현상이 나타나지 않고 파단으로 갑자기 파괴되는 특성을 갖는다. 가량 단축 인장응력을 받는 경우, 그 부재가 파손되는 수직
<그림3: 유압식 만능재료 시험기>은 인장시험에 널리 사용되고 있는 유압식 만능 시험기이며 <그림4: 인장 시험 전후의 시편>는 이것을 이용하여 인장시험한 후 시험전후의 시편 모양(외양)을 비교해 놓은 것이다.
인장시험 후 시편은 단면적이 급격히 줄어드는 네킹(nec-king): 목이 생긴다는 뜻) 현상을
Keff, Km, Kp : the effective thermal conductivities of the composite,
Metal matrix, Particles
φp : the volume fraction of reinforcements
a : the diameter of the reinforcement
- hc : the boundary conductivity.
Advantage
The air travels across the short
length of the fins laterally, rather than longitudinally down
the long length.
Focused on placing
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*Separate Electric furnace and other system like Electronic scale
-Because Electric furnace temperature is very high
so we need to protect other system.
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*N