Ⅰ. 서론
1) 실험목적
열교환기는 상이한 온도의 두 물질간의 열전달을 증진시키고자 하는 기능을 지닌 장치이다.
대부분의 경우에, 열교환물질들은 두 개의 유체흐름들이다. 흐름간의 혼합현상을 방지하기 위하여, 두 유체들은 열전달면 또는 열교환기 표면을 구성하는 고체벽에 의하여 분리
Abstract
DSC is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference are measured as a function of temperature. Differential scanning calorimetry can be used to measure a number of characteristic properties of a sample.
Glass transitions may occur as the temperature of an amorphous solid is increased. Th
(4) FDM으로 얻은 data의 Temperature profile
clear all
close all
T_fin = 28.8;
T_b = 34.8;
T_inf = 19;
k = 401;
h = 3.4752;
dx = 0.002;
d = 0.002;
A = eye(3750);
B = zeros(3750,1);
C = zeros(3750,1);
T = zeros(150,50);
for i=1:1:25
B(i,1) = T_fin;
end
for i=3726:1:3750
B(i,1) = T_b;
end
for i=26:1:3725
A(i,i-25) = d;
A(i,i-1) = d;
A(i,i) = -4*d
Air brush를 이용하여 분사하여 준다. Air brush는 공압에 의해서 작동하며 뒤쪽의 나사를 통해서 유량을 조절할 수 있다. TLC를 분사할 때도 Ink와 같은 방법으로 고르게 분사 해준다. 하지만 이 때 주의해야 할 점은 TLC가 발암성 물질이므로 반드시 마스크를 착용하여야 하며 다른 곳에 묻지 않도록 해야 한다
1. 제조방법
1) Styrene과 Acrylonitrile의 Copolymerization
라디칼 중합에 의한 공중합 반응에 있어서, 생성되는 공중합체의 조성은 각 단량체의 조성은 각 단량체의 조성은 각 단량체의 상대적 반응성과 농도에 의해서 조절된다.
어떤 한 단계에서 생성된 공중합체 중의 단량체 M의 몰분율을 F₁그 단
the factory and results serious faulty of semiconductor component !
Previous solution
Install ventilation fan and emit inner humid air
so that solve the problem.
New solution
Simply emitting chilly air means a sort of waste of energy. So….
Send low temperature air to inner HVAC(heating,
ventilating and air conditioning) so that reduce cooling
and heating load.
인큐베이터
- 사용한 제조사 및 모델
Drager - Isolette 8000
GE - Omnibed
- 항목별 점검방법
1. Drager - Isolette 8000
1) Alarm - Power Failure alarm / Low AirTemperature alarm
2) Temperature
3) Humidification
2. GE - Omnibed
1) Temperature / Humidification
4. 최종 - 점검표 및 항목별 오차율
알아본다.
2. 실험
⑴ 첫 번째 실험
-자연 대류에 동력 입력과 표면 온도사이의 관계를 증명한다.
▶실험방법-1
① finned 시험상자를 부착한다.
② 를 측정하여 기록한다. (=Ambient airtemperature.)
③ 20 Watt로 power를 조정한다.
④ 시간이 충분히 흐른 후 정상상태 조건이 되면 를 측정하여 기록한다.
온도 범위는 10-40이며, 사람의 온도 식별 범위는 0.2-1.2‘C이고, 27-30'C의 상온에서 피부의 온도가 가장 민감하다.
I. 기온
일상생활에서 사용하는 기온(airtemperature)은 지면으로부터 1.5m 높은 대기온도를 말하며, 기온은 대류권에서 지면으로부터 약 10km 정도까지는 약 0.5~0.6-'C의 비율로 저하한다.
x Diameter of Activated Carbon => 비산
-접촉시간(Contact Time) : 1 - 3 Sec
-활성탄 충진 높이 : 1m 전후(약 0.5 - 1m)
- 너무 낮으면 교체주기가 짧게 되고 너무 높으면 Pressure Drop이 커진다.
-습도(Relative Humidity of Air) : 70% 이하
-온도(Temperature of Air) : 40°C 이하
-유기용제 농도 : LEL의 50% 이하(단 Ketone의 경우 25% 이하)