1. Pump에서의 Cavitation (공동현상) 에 대하여 기술하고 이로 생길 수 있는 문제점과 그 방지책에 대해 논하시오
- Cavitation이란
유체가 넓은 유로에서 좁을 곳으로 고속 유입하거나 벽면의 요철, 만곡부 등으로 흐름이 직선적이지 못할 때 유체는 저압이 되고 포화증기압보다 낮아지면 기화되어 기포가
Ⅰ. 증산량 측정실험
1. 증산의 촉진과 억제
1) 공변세포
① 표피 세포의 변형체이다.
② 엽록체를 가지고 있어 광합성을 한다.
③ 기공을 열고 닫아 증산 작용을 조절한다.
④ 안쪽은 두껍고 바깥쪽은 얇다
2) 증산 작용의 조절
기공은 주위의 환경이나 식물체내의 수분 함유량에 의하여
2.3.3 Process Explanation
1) Foolish Model
주어진 raw meterial에서 glucose를 얻는 당화공정과 이후 fermentation을 이용해 ethanol을 얻는 process로 실제의 공정보다 매우 단순화 되어있는 model. ethanol 생성공정을 거치면서 발생한 impurity는 이 모델에 포함된 centrifuge공정에 의해 분리되어 처리된다. foolish model의 output 으로
the short
length of the fins laterally, rather than longitudinally down
the long length.
Focused on placing the jets at the end of the fins and using them to induce air flow longitudinally down the length of the fin
The primary jet to emanate directly through the heat sink base and entrain and expel air laterally over the height of the fins through a matrix of synthetic jets
heat transfer coefficient값의 문제점.
Convection heat transfer coefficient가 일정하다고 생각했으나 실제실험에서는 조원들의 움직임이나 실험실 문의 여닫음에 의해서 Forced convection이 일어났을 가능성이 있다. Forced convection이 일어나지 않았다고 생각하더라도 Free convection시에 온도구배에 의해서 실제로 Convection he